Applied Energistic Storage Room!

  • Please make sure you are posting in the correct place. Server ads go here and modpack bugs go here
  • The FTB Forum is now read-only, and is here as an archive. To participate in our community discussions, please join our Discord! https://ftb.team/discord
AE setup for boilers, everything is hidden under nether brick facades.
uvpLQ59.png

full in/out on gregtech machines and thermal expansion machines
NjmZXjk.png

sawmills on the other side
dFhj13c.png

warded AE setup, everythings in that room, quarries feed into it, 3 me drive bays with 28 drives so far. and they are all being used to some degree.
69fCj24.jpg

Assembly Room, circle of lasers, and assembly tables outputting into tesseracts automatically into ae
kMLtbk3.png

matter fab and portal gun room
gnZQdUw.png

partial automation on big machines, gonna move these upstairs with full ae setup.
F1BIW0R.png
 
  • Like
Reactions: Skyqula, Barbarian Kitten, Jerome Asich and 1 other person
AlanEsh said:
Waaaait... so the MAC can put together processed bits, but Interfaces need their own patterns installed to process the bits for the MAC?

Yes, please, regarding access to your tutorial :)

(for the record, I've watched Direwolf's AE video a couple of times... but i'm still a bit fuzzy on the MAC and other more advanced parts of the process.)
Click to expand...

It's not an all inclusive quide or spotlight, more a how to get a bare bones setup in a survival setting but might help:

part 1:

part 2:
 
I don't understand why people dump the cobble and dirt from their quarry into their AE drives. Mine goes into a couple of upgraded factorization barrels. Simple diamond pipes (which are very good at this simple task and are cheap to make) push dirt and cobble into their respective barrels. The barrels are hooked up to the AE network through storage busses. You could do the same with the deep storage units if you have that mod installed (think it's MFR).

Inserting stuff into the system and then exporting it again costs energy. Seems kinda pointless to me. And you never ever need that much cobble to begin with.

I have pretty much everything in my system and I'm using 3 64k drives simply because of the number of different items. The drives aren't full at all.

I have item tesseracts that lead into my AE system. It goes Tesseract > diamond pipe that filters out cobble/dirt > ME interface. Any cobble/dirt that doesn't fit into the barrel gets voided.
 
AlanEsh said:
Sooo, anyone able to get the ME Interface to work with a Rolling Machine?
Click to expand...
Yup. Put one set of the resources into the rolling machine first. Then set the Interface on top, and format the blank to the correct input and output. Plug and play![DOUBLEPOST=1367548024][/DOUBLEPOST]
IMarvinTPA said:
Try an export bus with the items you are using in the rolling machine as the filters.

IMarv
Click to expand...
That will use all of your resources in your system to craft. I'd rather not turn all my ingots into mixed metals.
 
  • Like
Reactions: AlanEsh
Barbarian Kitten said:
Yup. Put one set of the resources into the rolling machine first. Then set the Interface on top, and format the blank to the correct input and output. Plug and play![DOUBLEPOST=1367548024][/DOUBLEPOST]
That will use all of your resources in your system to craft. I'd rather not turn all my ingots into mixed metals.
Click to expand...
Place a level emitter pointed at the export bus. Set the export bus to only export when it has a redstone signal. Set the level emitter to send a signal when you have less than 10 (pick your own number) mixed metal ingots. If you are immediately using them, pick that result instead.

IMarv
 
IMarvinTPA said:
Place a level emitter pointed at the export bus. Set the export bus to only export when it has a redstone signal. Set the level emitter to send a signal when you have less than 10 (pick your own number) mixed metal ingots. If you are immediately using them, pick that result instead.

IMarv
Click to expand...
Unless they have changed it this is a poor option. Export busses will export as much of they can of the 1st item before even trying the 2nd item. That means for any recipe with multiple components (say MMI) it is going to keep stacks of 64 of each item besides the last in the rolling machine. Interfaces really are the way to go. Export busses and level emitters work great in some cases so you dont have to wait for craft times, but in this case there are some pretty huge downsides. (you could get the upswing of the export bus/level emitter by having the export bus in craft mode pointing right back into an interface though, which is a handy workaround if a bit expensive on materials)
 
Milaha said:
Unless they have changed it this is a poor option. Export busses will export as much of they can of the 1st item before even trying the 2nd item. That means for any recipe with multiple components (say MMI) it is going to keep stacks of 64 of each item besides the last in the rolling machine. Interfaces really are the way to go. Export busses and level emitters work great in some cases so you dont have to wait for craft times, but in this case there are some pretty huge downsides. (you could get the upswing of the export bus/level emitter by having the export bus in craft mode pointing right back into an interface though, which is a handy workaround if a bit expensive on materials)
Click to expand...
I have 2100 tungsten, 3800 aluminum, and 21k copper and 15k tin (for one type of brass/bronze) and 1787 Zinc for the other type of brass. I tend to not worry about waste unless it is Iridium, and that is getting cheaper with each Ultimate Hybrid I get put up. (Uranium is the long pole nearly now, I need more of them bees.)
 
Question: How intuitive about using tools is the crafting network?

Say, the recipes using the quartz knife in it, will it use quartz knives of any damage, or only use undamaged ones? Just for example, but this could also apply to minium stones too
 
Adonis0 said:
Question: How intuitive about using tools is the crafting network?

Say, the recipes using the quartz knife in it, will it use quartz knives of any damage, or only use undamaged ones? Just for example, but this could also apply to minium stones too
Click to expand...
AE is way smarter than even I am with crafting. If it sees that you ran out of oak planks it'll use spruce if you've got it. It keeps track of durability just fine.
 
AlanEsh said:
Sooo, anyone able to get the ME Interface to work with a Rolling Machine?
Click to expand...

Rolling machines pull from an adjacent chest as long as you have the machine primed with the recipe. I just have my me interface onto the chest so it drops the correct amount of items in there.
 
Ako_the_Builder said:
Rolling machines pull from an adjacent chest as long as you have the machine primed with the recipe. I just have my me interface onto the chest so it drops the correct amount of items in there.
Click to expand...
If the recipe is primed in the rolling machine you don't need to use the chest, the Interface is smart enough to evenly distribute the materials to all available slots. I use vacuum-hardened tungsteel ingots and other high end ingots in my rolling machine to make mixed metals. My interface just sits on top of the rolling machine. Remember to put an input bus on the side of the rolling machine regardless so you can get the rolled whatevers into your system automatically.
 
Barbarian Kitten said:
If the recipe is primed in the rolling machine you don't need to use the chest, the Interface is smart enough to evenly distribute the materials to all available slots. I use vacuum-hardened tungsteel ingots and other high end ingots in my rolling machine to make mixed metals. My interface just sits on top of the rolling machine. Remember to put an input bus on the side of the rolling machine regardless so you can get the rolled whatevers into your system automatically.
Click to expand...

Cool, thought I'd tried that when I set it up but must have had something wrong as it didn't evenly distribute for me, so went with the chest method. I'll get rid of the chest :)
 
Ako_the_Builder said:
Cool, thought I'd tried that when I set it up but must have had something wrong as it didn't evenly distribute for me, so went with the chest method. I'll get rid of the chest :)
Click to expand...
Perhaps use the interface to stock 3 of each type of ingot rather than inputting in?
But then you'd have to have a shut off of some sort

EDIT: Disproved by later posts.
 
Ako_the_Builder said:
Cool, thought I'd tried that when I set it up but must have had something wrong as it didn't evenly distribute for me, so went with the chest method. I'll get rid of the chest :)
Click to expand...
The problem may be that you're telling the interface to stock an amount of items. What you need to do is take one of the ME blank patterns and format it to look like the recipe you want. Be sure to put your output item in the output slot when formatting. Then simply shift click the pattern into your interface.
 
Neirin said:
Well, the thread is asking about storage, so...

Really, my favorite thing about AE is that you can access your network from wherever you decide to put down an access terminal (or is in range of a wireless access point). I haven't finished my system yet, but I plan to have an enormous network with access in every room of my base. All in all that will probably mean hundreds of cables and dozens of blocks, but that's not what was asked. The storage part of my network (which is complete) consists of 2 Drives (I'm future-proofing my system) and 3 Deep Storage Units.
Click to expand...
If you want to autocracy any complicated items with it, make sure the entire network is chunkloaded. Any update to the network clears the crafting queue, and as far as I can tell that includes chunks unloading. Certainly when I put in a long cable to a remote location, it stopped being able to craft large items reliably.
 
Barbarian Kitten said:
Yup. Put one set of the resources into the rolling machine first. Then set the Interface on top, and format the blank to the correct input and output. Plug and play!
Click to expand...
Awesome, that's the problem i was having... i did not prime the rolling machine with the first set of resources it needed.
I will probably set up 2 or 3 rolling machines with my most used recipe patterns.

Love. This. Mod.
 
  • Like
Reactions: Barbarian Kitten
You must log in or register to reply here.
Top Bottom