Ask a simple question, get a simple answer

  • Please make sure you are posting in the correct place. Server ads go here and modpack bugs go here
  • The FTB Forum is now read-only, and is here as an archive. To participate in our community discussions, please join our Discord! https://ftb.team/discord

gattsuru

Well-Known Member
May 25, 2013
364
103
68
FTB Academy was released recently, but it's very much intended as a Your First Modded Pack, and almost too simple even for that purpose. Before that, FTB Interactions, FTB Sky Odyssey, and FTB Builder's Paradise were March and April releases, and while Interactions is a long play pack, Sky Odyssey and Builder's Paradise are very much quick romps, with the former quite easily running into EMC cap problems within a week of play. And even Interactions is a GregTech pack, which has always been a built of a specialist interest.

There's still /some/ discussion of these packs (uh, less so for Builder's Paradise) on the subreddit, which tends to be slightly more active in recent times, but they're mostly tech support questions rather than the build showcases or narrative discussions that tended to do better in the XenPorta format. Even when they were new, there wasn't a huge amount of interest on the forums proper.

((It probably doesn't help that these packs didn't even get News Posts here, with the last pack to do so being the rather unfavorable FTB Continuum from 2018.))
 
  • Like
Reactions: ICountFrom0

LetMePlay

New Member
Oct 22, 2019
3
0
2
How can you contact the staff of this forum? I made a post last week in tech support (my first post on my account if that matters) and it needs to be approved to be visible. Because i posted a link to logs in it. However its been a week and no one has looked at it yet. I tried making a post without a link but that one also needs to be approved. I would really like some help cause i cant play the game now cause my launcher is broken (which is what I made a post about)
 

tsjb

New Member
Jul 29, 2019
45
0
0
I'm looking to start a guided, quest-focused modpack that I won't have to watch Youtube videos to get into. What do you guys suggest?

I was looking at Enigmata 2 - normal, is does seem really good but right now I'm looking for something a little more themed and not as much "kitchen sink". Thanks guys.
 

matheryn

New Member
Jul 29, 2019
12
0
0
so seeings as we are now going back to the old ftb launcher is there a time frame as to when we will be able to load and create 1.14 packs now that we have forge for 1.14 as id like to play the unstable pack and also modify it to my liking
 

Brotuulaan

Well-Known Member
Jan 14, 2018
190
38
53
Where's the search function? I want to look at my old threads (to troubleshoot AE2 fluid emitters not working), but I just get an error when I go to Your Content from my profile menu, and I don't see the search function anywhere.
 

Mantode

New Member
Dec 1, 2019
1
0
1
Hello, for some reason my FTB Launcher does not install. When I start the FTB Launcher for installation it says "Downloading pack data" and nothing happens, I tried leaving it be because I thought it maybe needs time to download, but after leaving it for few hours I knew that somethings wrong... Is there a way to fix it? I tried reinstalling the launcher, or Java version but it's still not installing itself.
 

Riddle78

Well-Known Member
Nov 28, 2016
214
63
54
Been having this issue for a while now,and it's resisted my attempts to fix it. Simply put,text really likes to overrun the page/panel/window/screen. For FTB Revelations,this is most evident in the left side pages in the Tinkers' Construct manuals. I've attempted changing my GUI scale,switching between fullscreen and windowed,and mucking with Optifine's Custom Fonts setting,plus all combinations thereof,to no avail. My native resolution is 1920*1080,and I'd really like to fix this headache.
 

Golrith

Over-Achiever
Trusted User
Nov 11, 2012
3,834
2,137
248
Been having this issue for a while now,and it's resisted my attempts to fix it. Simply put,text really likes to overrun the page/panel/window/screen. For FTB Revelations,this is most evident in the left side pages in the Tinkers' Construct manuals. I've attempted changing my GUI scale,switching between fullscreen and windowed,and mucking with Optifine's Custom Fonts setting,plus all combinations thereof,to no avail. My native resolution is 1920*1080,and I'd really like to fix this headache.
That'll most likely be due to the Smooth Font mod, which replaces minecrafts font with a true type font. Although it looks better, MC isn't designed for TrueType fonts and you'll get wrapping issues. You can adjust the font being used by the mod to one of your choice.
 

Riddle78

Well-Known Member
Nov 28, 2016
214
63
54
That'll most likely be due to the Smooth Font mod, which replaces minecrafts font with a true type font. Although it looks better, MC isn't designed for TrueType fonts and you'll get wrapping issues. You can adjust the font being used by the mod to one of your choice.
FTB Revelations doesn't have the Smooth Font mod,so that's not a factor.
 

Cptqrk

Popular Member
Aug 24, 2013
1,420
646
138
Speaking of Revelations pack..

I've managed to naturally spawn a flux rift.. woops.... But my book doesn't have the research available to learn how to close one yet.. What do I need to do to get this research?


EDIT: I know i scanned a crystal cluster before (naturally growing vis crystal) but apparently I needed to re-scan one again to unlock.
 
Last edited:

Veruuk

New Member
Jan 6, 2020
8
3
4
Hello everyone. First post here.

I have been learning mods in minecraft for some time now. currently working on ae2 and ic2 for now. So im trying to make a manual dye farm to color my ae2 smart cables. every wiki I read says that I should shear my tall mystical flower for 4 petals, but the problem is that I can't. The shear simply wont do anything to the mystical flower. i can left click but that just punches the flower down, no petals. This is in infinity evolved version 3.1.0.

Any feedback on what I am doing wrong would be appreciated!
 

GamerwithnoGame

Over-Achiever
Jan 29, 2015
2,808
1,507
224
Hello everyone. First post here.

I have been learning mods in minecraft for some time now. currently working on ae2 and ic2 for now. So im trying to make a manual dye farm to color my ae2 smart cables. every wiki I read says that I should shear my tall mystical flower for 4 petals, but the problem is that I can't. The shear simply wont do anything to the mystical flower. i can left click but that just punches the flower down, no petals. This is in infinity evolved version 3.1.0.

Any feedback on what I am doing wrong would be appreciated!
So, what should work is as follows: if you break the flower with the shears, you should get the tall flower as an item - this can then be crafted into 4 petals.
 
  • Like
Reactions: Veruuk

GamerwithnoGame

Over-Achiever
Jan 29, 2015
2,808
1,507
224
thanks. that was not very sustainable I guess I have to find another way to get my dyes :D
It’s not too bad ;) you plant one petal and get four back; I believe people have automated the planting, bonemealing and breaking process, making sure that the petals are split in a 1:3 ratio so a quarter go back into the planter.
 

PhilHibbs

Forum Addict
Trusted User
Jan 15, 2013
3,174
1,128
183
Birmingham, United Kingdom
Why is this level emitter lit up? The interface is empty. As you can see, the subnet consists of two cables, a storage bus on the interface, and a level emitter. Quartz cables connect to the subnet below to provide power, and the level emitter is isolated by cable anchors. The subnet below is identical, and detects three dusts in the interface and turns on the item conduit when there are three. This one just lights up all the time, as if it were connected to the main network.
upload_2020-1-6_18-52-54.png
upload_2020-1-6_18-49-31.png
 

Attachments

  • upload_2020-1-6_18-48-34.png
    upload_2020-1-6_18-48-34.png
    61.6 KB · Views: 165
  • upload_2020-1-6_18-48-45.png
    upload_2020-1-6_18-48-45.png
    292.1 KB · Views: 147
  • upload_2020-1-6_18-49-18.png
    upload_2020-1-6_18-49-18.png
    87.6 KB · Views: 151
  • upload_2020-1-6_18-52-43.png
    upload_2020-1-6_18-52-43.png
    118.7 KB · Views: 151