@Vechora
BigReactors in its normal (un-nerfed) state would have been unbalanced this pack. Nuclear - including Yellorium - is supposed to be a late-game (or late mid-game) power source.
[1.7.10][LISTED] InfiTech 2 Modpack v3.2.21 [HQM][GregTech balanced hard-mode modpack]
- Thread starter Jason McRay
- Start date
-
The FTB Forum is now read-only, and is here as an archive. To participate in our community discussions, please join our Discord! https://ftb.team/discord
@Vechora
BigReactors in its normal (un-nerfed) state would have been unbalanced this pack. Nuclear - including Yellorium - is supposed to be a late-game (or late mid-game) power source.
Well, the good news in AE2 is after you have the Quantum Gate link established, it automatically sends AE2 power across to the other side. In AE1, you had to provide power separately. But, in AE2, it takes power from the AE2 network itself - including across the quantum link - to maintain connection.
Just be warned, though. It's a *lot* of power. Each pair of gates is up to 1,000 EU/t if I'm not mistaken. A single max-sized BR Turbine or a single Naquadah can power plenty of pairs of gates, so it's not completely ridiculous, just "late-game".
Then, if you want to send even *more* power across the quantum link, you can use AE2 P2P tunnels. There are EU and RF P2P connections/tunnels.
Ah nice to know, also perfectly in line with everything else gregtech
I know or at least, did the calculations and was like "why bother with coke ovens and a treefarm if I have enough yellorium to power a small island nation?" well because it's gated!
That said, I did hugely cheat by going for thaumcraft in the first place having pickaxe of the core+ a golem treefarm makes things so much "easier". Drilling out entire veins with the arcane bore is childs play when you have a thaumic restorer and infinite* instrumentum via crafting tables.
Hey, does anyone know of any issues with saved worlds when updating the server to the latest version of the modpack? We're running 2.1.12 at the moment, and would like to update to the latest version, but we don't want to lose what we've created thus far. I can just do it (after making a backup, of course) and see what happens, but would love it if someone could give me a heads up!
I can't change the time on the server, is there any other way around this or am I just simply screwed for 24 hours of April fools?
Im not too sure,
my server is hosted at home (which made things easier) and the time is changed on that, and the time on all other local computers in the house.
Regarding the GenDustry genetic imprinter, am I really supposed to lose so many pristine princesses in this thing? So much genetic waste
Yeah. It's still much faster to find a few more pristine pricesses, than having to breed the traits manually for each one of them.
@Slowenemy @Dlur100
If you get the following message when trying to login to any server today (4/1):
The following microblocks are not installed on this client: tile.whiteStone
Then, go to your client config/HardcoreEnderExpansion.cfg, and change hardcoreEnderbacon to a 2 like so:
Hat tip : chylex.
@chylex
(i.e. HEE's author)
If you get the following message when trying to login to any server today (4/1):
The following microblocks are not installed on this client: tile.whiteStone
Then, go to your client config/HardcoreEnderExpansion.cfg, and change hardcoreEnderbacon to a 2 like so:
Code:
# 0 = enabled on April Fools, 1 = always enabled, 2 = never enabled.
I:hardcoreEnderbacon=2Hat tip : chylex.
@chylex
(i.e. HEE's author)
Last edited:
Out of curiosity are you able to power IC2, GT, or eIO machinery with AE2 somehow? Seems that for automating processing and the like it would be much cleaner to provide the power directly from the AE2 power where you have your import and export buses. I have a gut feeling that GT wouldn't play nice this way, but a SAG mill or eIO smelter?
You can, yes. Slap a P2P interface of the appropriate power type on the consumer. However, I don't believe you can have it on the same face as the import/export bus. You will need separate machine faces for P2P and import/export buses.
And, you're right about GT. AE2 P2P supports IC2 EU and I don't believe AE2 P2P supports GT EU.
Speaking of AE2 P2P, I wonder if it has power loss for IC2 EU.
Too bad eIO doesn't have a ME P2P power connector, or input/export buses for that matter. But still taking up a face on an eIO device for power isn't a big deal if you don't have to also run power all over the place as well.
Are the eIO ME and Dense ME cables viable?
So I'm getting massive FPS drops in 2.1.7 that were not present in 2.1.6, the kind where your memory usage spikes to 100% and your fps drops to zero for a few seconds, repeating a few times a minute. I tried lowering the memory allocated to FTB down to 2gb but it made no difference (its fixed the issue in the past). Anyone else have this problem?
I've also rolled back to 2.1.6 and now i'm missing a bunch of textures in gregtech (tools and machine parts mostly, no blocks), i tried deleting the modpack and redownloading it but the textures are still missing.
I've also rolled back to 2.1.6 and now i'm missing a bunch of textures in gregtech (tools and machine parts mostly, no blocks), i tried deleting the modpack and redownloading it but the textures are still missing.
v2.1.8 - Hotfixes
v2.1.7 is still set as recommended. To update to this version you need to choose it from the version list.
Writing this post in advance, so it might take few minutes to show up on the launcher.
Edit: This is probably one of the last updates for InfiTech 2. From now on, will be focusing mainly on the new iteration of InfiTech.
Updated Mods:
- Automagy to 0.22.1
- BDLib to 1.7.0.69
- Buildcraft to 6.4.6
- BuildcraftCompat to 6.4.2
- EnderIO to 2.2.8.366
- EnderZoo to 1.0.10.25
- Fastcraft to 1.21
- Galacticraft to 3.0.11.309
- Gendustry to 1.4.9.75
- IC2 to 2.2.706
- LogisticsPipes to 0.8.3.114
- Malisis Core to 0.11.3
- Malisis Doors to 1.5.1
- OpenComputers to 1.5.5.12
- PneumaticCraft to 1.6.4-66
- Thaumic Tinkerer to 2.5-478
- Yampst to 2.1.8
Config changes/tweaks:
- Turned off SecretRoomsMod integration with MalisisDoors to fix trapdoor crashes
- Fixed Graves not storing items
- More Bug Fixes
- Automagy to 0.22.1
- BDLib to 1.7.0.69
- Buildcraft to 6.4.6
- BuildcraftCompat to 6.4.2
- EnderIO to 2.2.8.366
- EnderZoo to 1.0.10.25
- Fastcraft to 1.21
- Galacticraft to 3.0.11.309
- Gendustry to 1.4.9.75
- IC2 to 2.2.706
- LogisticsPipes to 0.8.3.114
- Malisis Core to 0.11.3
- Malisis Doors to 1.5.1
- OpenComputers to 1.5.5.12
- PneumaticCraft to 1.6.4-66
- Thaumic Tinkerer to 2.5-478
- Yampst to 2.1.8
Config changes/tweaks:
- Turned off SecretRoomsMod integration with MalisisDoors to fix trapdoor crashes
- Fixed Graves not storing items
- More Bug Fixes
Writing this post in advance, so it might take few minutes to show up on the launcher.
Edit: This is probably one of the last updates for InfiTech 2. From now on, will be focusing mainly on the new iteration of InfiTech.
Man I can't wait to see everyone's surprise when we announce we're replacing gregtech with dartcraft.
I dunno why I said "we" when I have about as much say in the matter as my cat.
But yeah, Jason's going nuts with the new version. Now if only we can get the EE3/XyCraft integration working...
My cat makes 90% of my minecraft related decisions for me. Earlier this morning I couldn't decide which bee species to breed next. So I found 2 cardboard boxes and wrote Iridium on one and Uranium238 on the other. My cat laid down in the Iridium box so, iridium bees it is!