Remember, scratch only after they take the stitches/staples out!
Sent from my Puzzle Box of Yogg-Saron using Tapatalk 2
Sent from my Puzzle Box of Yogg-Saron using Tapatalk 2
[1.7.10] The Ferret Business [WIP][BQ + HQM, 500+ Quests][v 0.2.6]
- Thread starter Caigan
- Start date
-
The FTB Forum is now read-only, and is here as an archive. To participate in our community discussions, please join our Discord! https://ftb.team/discord
Best wishes on your surgery. Real life, and particularly your health (which includes headspace, so don't apologize for doing other things to relax when programming modpacks wears you down), should always be priority number one. Your adoring Minecraftian fans will wait!
Addendum: (Non-Crash Error)
It is possible to melt tritanium in the TiCon smeltery, but NEI does not show 'Molten Tritanium', nor is there a 'Bucket of Molten Tritanium.' This prevents whitelisting Molten Tritanium in a Thermal Dynamics servo (which are usually whitelisted by using a bucket of molten metal). It is also not possible to pour Tritanium ingots or a Tritanium block from the TiCon smeltery (but it is possible to pour Tritanium TiCon tool components).
NEI does show a recipe for pouring Tritanium ingots and Tritanium blocks using the smeltery casting table + ingot mold and the smeltery basin respectively, but neither of these are actually pourable using a smeltery faucet or a Thermal Dynamics hardened fluiduct + servo. Attempting the latter results in the fluiduct containing an appropriate amount of molten Tritanium, but it does not treat either the casting table or the basin as legitimate 'targets.' for the molten tritanium.
Molten tritanium can be 'rescued' in such a circumstance by placing a thermal expansion portable tank beneath the fluiduct.
I suspect that the lack of a proper 'molten tritanium' and 'bucket of molten tritanium' in NEI are the culprits here, but as I don't actually have experience with creating Minecraft modpacks, I am not sure.
It is possible to melt tritanium in the TiCon smeltery, but NEI does not show 'Molten Tritanium', nor is there a 'Bucket of Molten Tritanium.' This prevents whitelisting Molten Tritanium in a Thermal Dynamics servo (which are usually whitelisted by using a bucket of molten metal). It is also not possible to pour Tritanium ingots or a Tritanium block from the TiCon smeltery (but it is possible to pour Tritanium TiCon tool components).
NEI does show a recipe for pouring Tritanium ingots and Tritanium blocks using the smeltery casting table + ingot mold and the smeltery basin respectively, but neither of these are actually pourable using a smeltery faucet or a Thermal Dynamics hardened fluiduct + servo. Attempting the latter results in the fluiduct containing an appropriate amount of molten Tritanium, but it does not treat either the casting table or the basin as legitimate 'targets.' for the molten tritanium.
Molten tritanium can be 'rescued' in such a circumstance by placing a thermal expansion portable tank beneath the fluiduct.
I suspect that the lack of a proper 'molten tritanium' and 'bucket of molten tritanium' in NEI are the culprits here, but as I don't actually have experience with creating Minecraft modpacks, I am not sure.
known issue your currently not able to anything with molten tritaniaum in the smeltry short of turning ore to liquid and moving the liquid into a tank afterwards
This is not a crash per say but with the 0.1.3 version of The Ferret Business, CPU usage will spike so high that all players are kicked before calming down again. Profiling it during this time leads to the observation that HQM item detection upon item pick up is causing this. I would normally hand this over to the HQM github but Ferret Business has a custom HQM to which I am not sure if I should really post over there for. I cannot provide suggestions but I would like to at least report this.
what were you using to profile it? that's amazing.
also i've noticed an "undefined" in the chunk update section takes up..sometimes 50% of the entire update cpu usage. would be nice to diagnose it further.
Can you post the FC2 fix for us, just in case you don't get a beta out?
Edit: Fix is available on the Discord that's in Caigan's signature, I will post a direct link if people ask.
Edit: Fix is available on the Discord that's in Caigan's signature, I will post a direct link if people ask.
Last edited:
Hi Markhor, I was using Warmroast (a plugin) for Bukkit/Cauldron/KCauldron. In my case I was using KCauldron with it.
i have the wvyren flux capicator in my world the questbook has it hidden behind a "useful item" for the same chapter quest id assume the draconic one is hidden in the same way but behind the draconic version of what hid the wyvern one so yay (im being vague on purpose )
P
philandkitt
Guest
Best I can tell is that an item stack of a tool is trying to render as an entity in the world and that is causing you to crash. If it is on the ground, you could try using McEdit to remove the entity near you. Moving your player would just mean that area is no longer safe, so McEdit may be the best bet.
I don't know if it's too late to get it in for the 0.1.4 update, but updating Journeymap from 5.1.4 to 5.1.4p1 fixes a few issues
Cheers.
- Critical Bugfix: (#6) AutoMap didn't use correct biome coloration in chunks not already in memory
- Critical Bugfix: (#10) Log spam for unregistered blocks ("Can't find UID for block...")
- Bugfix: (#56) Waypoint Manager's sort-by-name should ignore case
Cheers.
2nd one sounds lovely , i wonder if the first will solve my issue of already existing land turning purple on the map (after something happening idk what exactly)
The second one means Caigan could turn hellfish back on(I honestly hope he doesn't), and the first is useful in some circumstances, such as what luckdemon mentioned.
Yes it will fix the purple, as journeymap is a client-side mod you can even update it if you play on a server and it will still work!