Cheers dude, it's quite handy to have some videos to point people to instead of trying to explain intergrated dynamics in text form... That would be kinda hard!Thanks!
I'll give it a look, your video's are very good!
-= Wuffle =- !
I'm going to start Extreme Reactor build tonight, I 'might' install a computers mod into the pack to control the reactor, it simply makes for incredibly efficiency with fuel consumption.
Not sure if this will help but sneak+right click to set the sender, normal right click to set the receiverI'm having a heck of a time with the AE2 memory card... i'm working on setting up a basic P2P system so I can move power to machine in the AE2 network but when I right-click on a conduit power store with the memory card nothing happens...
-= Wuffle =- ~
Not sure if this will help but sneak+right click to set the sender, normal right click to set the receiver
------------------------
My Age of Engineering Series: http://www.youtube.com/playlist?list=PLUZaEaeCvlj6ChY3jks-N8rW74_3qEtmD
I don't see why it should be left out, but if it is then the RF tools power cell is one of the best (and inexpensive) ways of wirelessly moving power large amounts of power - 5k RF/t each side they are incredibleThanks, got all that sorted out.
Right clicking on the source P2P node defines it's type, then you use the memory card to copy/paste from that to destination(s) in the network, typically so
that things like Power etc can be transported across the network.
I've got fluids, redstone etc all sorted out, but I can't get RF to work..
What do you use to program a P2P node to be RF ? The usual suspects (ender io conduits, various power cables etc) aren't working.
-= Wuffle =- !
Has the ability to set up RF P2P networks been disabled, I cannot see any RF P2P nodes in JEI... If so what would be horrid... looks like i'll need to separately supply power to my RF machines then.
Thanks, got all that sorted out.
Right clicking on the source P2P node defines it's type, then you use the memory card to copy/paste from that to destination(s) in the network, typically so
that things like Power etc can be transported across the network.
I've got fluids, redstone etc all sorted out, but I can't get RF to work..
What do you use to program a P2P node to be RF ? The usual suspects (ender io conduits, various power cables etc) aren't working.
-= Wuffle =- !
Has the ability to set up RF P2P networks been disabled, I cannot see any RF P2P nodes in JEI... If so what would be horrid... looks like i'll need to separately supply power to my RF machines then.
Oooh I love the glowstone texture, what is that?Final Assembly room - phase #1.
New controller is running and integrated with a backbone bus carrying 32 P2P channels throughout the new building.
My auto crafting room is ...
Unfortunately, the plan to use Phantom faces did not work, that's a real shame but I suppose the ME Interfaces just need to be connected directly (without a proxy) to what they're needing to work with.
Following Ieldra's idea of putting in a blank floor level between floors of the base meant that I could put all the Molecular Assemblers under the floor
So I think i'll add several Crafting CPU's in this room with the spare channels. At present I have 30 x 9 ME Interfaces, so that's 270 craftable slots for now.
Which should see me for a while yet.
Now to start working on the machine shop, I'll start by automating all of the machine frames and cases, then begin working on programming in the plans for all the bits for extreme reactors, to start generating more power and then Blutonium for later use.
So far very happy with everything, base is coming along nicely, getting a LOT bigger, sort of like a Uni campus lol.
The 'bootstrap' AE2 room is now fully integrated, just need to solve problem is accessing the storage in the big basement.
-= Wuffle =-
Oooh I love the glowstone texture, what is that?
------------------------
My Age of Engineering Series: http://www.youtube.com/playlist?list=PLUZaEaeCvlj6ChY3jks-N8rW74_3qEtmD