How to produce massive RF?
- Thread starter iMontouch
- Start date
First time making big reactors hah !
A simple 7x7x7 reactor, Diamond Blocks around Fuel Rods, Enderium all around the edge, nice thing about enderium only have too do the top layer flow takes care of the rest of the air blocks.
I keep the rods at 60% 4.8krf/t if I run it out I peak out at 14-15krf/t
A simple 7x7x7 reactor, Diamond Blocks around Fuel Rods, Enderium all around the edge, nice thing about enderium only have too do the top layer flow takes care of the rest of the air blocks.
I keep the rods at 60% 4.8krf/t if I run it out I peak out at 14-15krf/t
would be funny that the TPS is low not because of the massive reactor, but all the machines they're running from the power of the reactor
wooow.
all that work. . . all that space. . . for the aptly named "big reactors"
I have an 8 core pebble bed from reactorcraft feeding 4 water-fed turbines or one HP and the multiblock generator for about 750K RF/t.
I can double that if I feed ammonia to the small turbines. thats 1.5 MILLION RF/t.
most of the space here is for the turbines. a turbine is about the same size as one of the two heat exchanger-boiler units is about the same size as the reactor itself. I can fit a lot of these setups into the space used for that first big reactor.
and this is still a SMALL setup. ill see about uploading a picture soon.
im setting up a test world atm for seeing just how high I can push the output of a fusion reactor.
reactorcraft: for when you need REAL power.
T
Techly88
Guest
Up to 1.6 MILLIONS RF/tick?? Are there anything even more power dense than this (other than 64x Nether Star Generators)?
Also how do they drain the power out to the lasers?