this week I saw the twitch streamer ZeekDaGeek build a very awesome extractor setup from Rotarycraft.
the setup was so insanely fast, he was swimming in resources in a matter of minutes.
after rewatching the stream I was able to rebuild this setup in my own creative world, and I'm now sharing the setup for the ones interested. Zeek was using a computer in his setup to provide a redstone signal timer, but since I can't code at all I instead am using the timer/toggle switch from ProjectRed
the setup looks like this...
for this setup I'm using the following items...
you'll also need
as seen the bevel gears goes first, leading into 3 shaft junctions, which then lead into a CVT unit. you'll need to fill the CVT unit with 31 belts and set it to redstone control, with 8x Speed with Redstone Signal on and 32x Speed with Redstone Signal off. don't forget the CVT unit needs 1 bucket of lubricant to work, but it doesn't need more then that 1 bucket.
the CVT unit leads into another bevel gear as the extractor needs to be powered from the bottom. again you can configure the input/ouput through the inface. place the extractor on top and make sure the extractor has water as some steps require water. in the picture you can see I'm using a creative tank from Thermal Expansion, but you could also for example use an aqueous accumulator from Thermal Expansion
you can also choose to have an automatic input/output for the extractor, and as you can see, I'm using the itemducts from Thermal Expansion for this.
don't forget to place down the toggle switch and timer at the CVT unit, as this is the whole reason why this setup is so insanely fast. the extractor goes through several stages to refine the ore, but each stage needs a different speed and torque. by constantly switching the redstone signal on/off the CVT unit will keep switching the speed and tourge. place the toggle switch's output towards the CVT unit, and place the timer at the input from the toggle switch. put the timer to tick at 1 second everytime. ofcourse don't forget to put a switch at the timer otherwise the timer will constantly keep ticking.
the last thing you'll need is jet fuel for the gas turbines. jet fuel isn't the easiest to get, but if you've done the build so far some jet fuel shouldn't be a problem. I'm using another creative tank from Thermal Expansion to feed the jet fuel into them through liquiducts.
now you're pretty much done. fuel the turbines with the jet fuel, and the whole thing starts working. now it does needs a few seconds for the extractor to start going, but soon as you've it running, you better have a large chest ready for the resources
it's best to first collect a large amount of resources, and then mass process them in the shortest amount of time to save on jet fuel. all creds ofcourse go to ZeekDaGeek
the setup was so insanely fast, he was swimming in resources in a matter of minutes.
after rewatching the stream I was able to rebuild this setup in my own creative world, and I'm now sharing the setup for the ones interested. Zeek was using a computer in his setup to provide a redstone signal timer, but since I can't code at all I instead am using the timer/toggle switch from ProjectRed
the setup looks like this...
for this setup I'm using the following items...
- 4 Gas Turbines
- 3 Shaft Junctions
- 2 Bevel Gears
- 1 Extractor
- 1 CVT Unit with 31 Belts set at 8x Speed with Redstone Signal on, and 32x Speed with Redstone Signal off
you'll also need
- 1 Timer
- 1 Toggle Switch
- an infinite water supply
- Jet fuel
as seen the bevel gears goes first, leading into 3 shaft junctions, which then lead into a CVT unit. you'll need to fill the CVT unit with 31 belts and set it to redstone control, with 8x Speed with Redstone Signal on and 32x Speed with Redstone Signal off. don't forget the CVT unit needs 1 bucket of lubricant to work, but it doesn't need more then that 1 bucket.
the CVT unit leads into another bevel gear as the extractor needs to be powered from the bottom. again you can configure the input/ouput through the inface. place the extractor on top and make sure the extractor has water as some steps require water. in the picture you can see I'm using a creative tank from Thermal Expansion, but you could also for example use an aqueous accumulator from Thermal Expansion
you can also choose to have an automatic input/output for the extractor, and as you can see, I'm using the itemducts from Thermal Expansion for this.
don't forget to place down the toggle switch and timer at the CVT unit, as this is the whole reason why this setup is so insanely fast. the extractor goes through several stages to refine the ore, but each stage needs a different speed and torque. by constantly switching the redstone signal on/off the CVT unit will keep switching the speed and tourge. place the toggle switch's output towards the CVT unit, and place the timer at the input from the toggle switch. put the timer to tick at 1 second everytime. ofcourse don't forget to put a switch at the timer otherwise the timer will constantly keep ticking.
the last thing you'll need is jet fuel for the gas turbines. jet fuel isn't the easiest to get, but if you've done the build so far some jet fuel shouldn't be a problem. I'm using another creative tank from Thermal Expansion to feed the jet fuel into them through liquiducts.
now you're pretty much done. fuel the turbines with the jet fuel, and the whole thing starts working. now it does needs a few seconds for the extractor to start going, but soon as you've it running, you better have a large chest ready for the resources
it's best to first collect a large amount of resources, and then mass process them in the shortest amount of time to save on jet fuel. all creds ofcourse go to ZeekDaGeek
