I originally set out to build a cheap mfr and forestry free tree farm. What I ended up with wasn't cheap but it is magnificently fast. I originally wanted the chopping mechanism to be botania but the most recent 1.6 version is just to buggy to work with. Instead I went with the Awakened Ichorium Axe from TT Kami because
A)it has treecapitator ability
B)its unbreakable
With this in mind I began to build. This is my design.
	
	
		
			
		
		
	
	
		 
	
		
	
I started it with 1 sapling and within 10 minutes the chest looked like this
	
	
		
			
		 
	
		
	
I used a TT Kami awakened ichorium axe in an autonomous activator (as mentioned above)
	
	
		
			
		 
	
		
	
A Steve’s factory manager redstone emitter set to give a strong signal was the method I used to check if the tree had grown (saplings don’t conduct strong redstone signals but logs do)
	
	
		
			
		 
	
		
	
I used the blood magic Ritual of The Green Grove to “help” with growth (this thing is insanely fast…)
	
	
		
			
		 
	
		
	
I used an openblocks block placer to set down the saplings
	
	
		
			
		 
	
		
	
I used a timer (this time for engineer’s toolbox) to activate it because if I had it place a sapling to quickly than it would replace the old leaves and the sapling rate would be super low
	
	
		
			
		 
	
		 
	
		
	
I used a rapid item valve with thermal expansion item ducts to take the fallen logs, apples, and saplings
	
	
		
			
		 
	
		
	
I also have a version of this that goes at 4x the speed. I’ll have pictures of that up tomorrow .
.
				
			A)it has treecapitator ability
B)its unbreakable
With this in mind I began to build. This is my design.
 
	I started it with 1 sapling and within 10 minutes the chest looked like this
 
	I used a TT Kami awakened ichorium axe in an autonomous activator (as mentioned above)
 
	A Steve’s factory manager redstone emitter set to give a strong signal was the method I used to check if the tree had grown (saplings don’t conduct strong redstone signals but logs do)
 
	I used the blood magic Ritual of The Green Grove to “help” with growth (this thing is insanely fast…)
 
	I used an openblocks block placer to set down the saplings
 
	I used a timer (this time for engineer’s toolbox) to activate it because if I had it place a sapling to quickly than it would replace the old leaves and the sapling rate would be super low
 
	 
	I used a rapid item valve with thermal expansion item ducts to take the fallen logs, apples, and saplings
 
	I also have a version of this that goes at 4x the speed. I’ll have pictures of that up tomorrow
 .
. 
				
		 
 
		
 As long as you give the harvester enough power it will rip through trees quite quickly.
 As long as you give the harvester enough power it will rip through trees quite quickly.
 
 
		