What's wrong with my tokamak?

[imPlayin]

My fusion reactor from ReactorCraft just won't behave

Spoiler

 

[eric167]

two magnets arnt being cooled, check alignment/rotation, and since the plasma is going straight out from the injectors and I don't see the sparks between them, so it doesn't look like they are being powered.

 

[Someone Else 37]

Indeed. You need to run LN2 to the two toroids just below the left most injector, place a powered Van de Graff below one of the toroids, rotate the injector tile entities in your injectors so they are all pointing in the same direction (clockwise or counterclockwise, your choice), and supply power to the solenoid in the center if you aren't already.

 

[KingTriaxx]

I'm not seeing any Van de Graff Generators.

 

[Reika]

I see at least six obvious build errors, two of which I struggle to imagine how you could have made (since they are so obviously wrong and one is difficult to pull off at all).

 

[zemerick]

The biggest, glaring issue that Reika is talking about is your left Injector is facing completely the wrong direction. ( Bottom is also misaligned, but less glaringly so. )

Also, you should always post your version, as things change from time to time. For example, V9 fixed a major issue with getting a tokamak working in v8.

 

[imPlayin]

The thing does actually have VDGs, I'm just to far away for them to be rendered. Also added the missing pipes. And I fixed the two injectors (I never knew which side they were placed from made a difference - thanks for your hint Reika!)
Now it's working.