I have tried everything to get this working. Note: this is my second one so i kinda know what i am doing, the cobble is the plates and the stone is the covers. Also the stuff on the right is a transposer and retreiver on an enderchest with batteries to recharge the battery box. I can put up my world file if you want. Any help is appreciated!
Redpower 2 frame tunnelbore help
- Thread starter zwahlm14
- Start date
-
The FTB Forum is now read-only, and is here as an archive. To participate in our community discussions, please join our Discord! https://ftb.team/discord
Celestialphoenix
Too Much Free Time
The wire to the left of your batterybox need to be on a cobblestone panel, not a stone cover.
I assume you have covers on the bottom of your machine.
Pulsing both motors like that may cause a few issues.
If thats not it, post a few screenshots from different angles.
I assume you have covers on the bottom of your machine.
Pulsing both motors like that may cause a few issues.
If thats not it, post a few screenshots from different angles.
I figured it out
i had some frames going all the way around an enderchest and i guess it was creating some kind of feedback loop or something so i redesigned it. If you still want to see it for some ideas i can put up a world download because this frame quarry mines at both level 10 and at level 40 so i get both the stuff at the bottom of the world and the stuff in the middle like tin and copper. i have also figured out how to get world anchors to work properly on frames by haveing 2 set up in a special way.
i had some frames going all the way around an enderchest and i guess it was creating some kind of feedback loop or something so i redesigned it. If you still want to see it for some ideas i can put up a world download because this frame quarry mines at both level 10 and at level 40 so i get both the stuff at the bottom of the world and the stuff in the middle like tin and copper. i have also figured out how to get world anchors to work properly on frames by haveing 2 set up in a special way.ok, i have fixed all the problems with it and here the world if you want to look at it. Feel free to ask questions about it as i am now basically an expert about this stuff after this build
here is link: http://www.mediafire.com/?r4g1b6i9hgk1mg9
here is link: http://www.mediafire.com/?r4g1b6i9hgk1mg9
i don't know, that would be awfully hard. And kinda pointless when there are tons of really good tutorials on youtube already.Would you mind writing kind of a tutorial on a tunnel bore?
Are there any problims with running in to lava or water pools ?
Wat happens with the the source blocks of water en lava that the breakers up front gobble up ?
Wat happens with the the source blocks of water en lava that the breakers up front gobble up ?
i notist that the breakers ate the source block of lava , i just wonderd if that dint block up the system at a point
if by that you mean that they just kinda go through the lava and leave lava walls everywhere then no it dues not because all the motors and stuff that could cause the frame to stop by getting water/lava on them are in a house designed so that water and lava can't get in. Hope this is what you was looking for.
no thats moving water/lava thats just pushed away , i mean actual source blocks
i made one in creative mode and build a lava lake in the air in front of it and it ate it all up i mean that everything was gone so all the blocks go in to my chest ,
but was just wondering what happens with the lava blocks than ? they probably just get destroyed
i made one in creative mode and build a lava lake in the air in front of it and it ate it all up i mean that everything was gone so all the blocks go in to my chest ,
but was just wondering what happens with the lava blocks than ? they probably just get destroyed
the lava gets destroyed yes, unless you use a pump to pump it out but then it would be very hard to automate and kinda pointless.[DOUBLEPOST=1357413898][/DOUBLEPOST]
it depends on where your modpack is installed, i think the default is on your desktop. an easy way to find it is to to to texturepacks in the options and ckick open texture pack folder and simply look at the location of the file which if it dusn't show up directly on the window then just go to the folder properties and it should be in there. once you find it just put the world into your saves folder and unzip it.