-
The FTB Forum is now read-only, and is here as an archive. To participate in our community discussions, please join our Discord! https://ftb.team/discord
Railcraft Iron Tanks
- Thread starter noskk
- Start date
The maximum default tank size is indeed 7x7x8, storing 6,272 buckets (which each bucket being 1000mB, or "millibuckets", of liquid which is where enoch is getting his millions from)
You can increase the maximum floor dimensions from 7x7 to 9x9 in the config, but the maximum height of 8 blocks cannot be changed. So the largest possible singular iron tank is 9x9x8, storing 10,368 buckets.
However, you can stack iron tanks vertically if you place valves in the right slots, and they will combine their inventories. So in practical application, the largest possible Railcraft iron tank is 9x9x248 blocks large, storing a staggering 321,408 buckets of liquid. The world height limit of 256 and the bedrock layer starting at 5 prevents you from stacking any more tanks on top.
You can increase the maximum floor dimensions from 7x7 to 9x9 in the config, but the maximum height of 8 blocks cannot be changed. So the largest possible singular iron tank is 9x9x8, storing 10,368 buckets.
However, you can stack iron tanks vertically if you place valves in the right slots, and they will combine their inventories. So in practical application, the largest possible Railcraft iron tank is 9x9x248 blocks large, storing a staggering 321,408 buckets of liquid. The world height limit of 256 and the bedrock layer starting at 5 prevents you from stacking any more tanks on top.
Probably enough to hold all that creosote I make but never use then.
Bluehorazon
New Member
Or to throw some coal into lava
Well if you reach a certain point in game your ressource and energy-production snowballs so hard, that it doesn't really matter^^.
That brings up an interesting bug I found recently. I pumped out a well of oil into my 7x7x8 iron tank. It got up to about 2000 buckets full, but when I logged out and then back in, it had dropped to less than half of that. Is this a bug with RC or am I doing something wrong?
nobody is sane enough to stack iron tanks from bedrock to height limit.. I think 9x9x8 is the answer then.. thanks..
Challenge accepted.
Magicferret
New Member
Chunk loading and iron tanks is a bit strange sometimes, I had a water tank that would reset to empty every time I went to a Mystcraft age. Putting a world anchor near it solved it though. There's obviously still a few bugs with loading and unloading the tanks so keeping the chunks they're in loaded is a good safety measure.
Direwolf20 had a similar issue on his Forgecraft series where a tank that he filled from a valve in the bottom middle would periodically reset to empty. Other tanks that didn't have valves there were unaffected. CovertJaguar acknowledged it as a bug. See the Railcraft changelog for 6.8.0.0: "FIX: May have fixed an Iron Tank reset bug involving pipes and valve blocks in specific locations."
That version isn't in FTB yet, but once we got to 1.4.5 it should be.
That version isn't in FTB yet, but once we got to 1.4.5 it should be.
I'm going to ask here instead of starting a new thread:
Does anyone know how to use the railcraft water tanks?
http://railcraft.wikispaces.com/Water+Tank+(Device)
wiki says it is supposed to be built like a coke oven. I did that and hooked up pipings like you would on a regular tank.
It is placed outside, and there has been raining more then 10 times since I made it. No water in it.
I can't click on it either, are you supposed to be able to do that? Help please
Does anyone know how to use the railcraft water tanks?
http://railcraft.wikispaces.com/Water+Tank+(Device)
wiki says it is supposed to be built like a coke oven. I did that and hooked up pipings like you would on a regular tank.
It is placed outside, and there has been raining more then 10 times since I made it. No water in it.
I can't click on it either, are you supposed to be able to do that? Help please
Yes, you build it exactly like a coke oven. A 3x3 structure with the center block empty. Once you did that, the structure becomes clickable and gets a GUI that shows its water storage. I've built multiple ones in FTB already.
If you didn't get that GUI - you probably built it wrong.
If you didn't get that GUI - you probably built it wrong.
If you're open for something else, try the aqueous accumulator. It's space efficient and it can auto-eject directly into other machines/tanks
http://thermalexpansion.wikispaces.com/Aqueous+Accumulator
http://thermalexpansion.wikispaces.com/Aqueous+Accumulator
that looks 10 times easier then using a railcraft water tank. thank you
