Help With Geothermal Generators

  • Please make sure you are posting in the correct place. Server ads go here and modpack bugs go here
  • The FTB Forum is now read-only, and is here as an archive. To participate in our community discussions, please join our Discord! https://ftb.team/discord

NickQB7

New Member
Jul 29, 2019
9
0
0
I can't get my Geothermals to output power. They are all filled with lava, but this red thing isn't filled, so I figured that was it. However, I don't know what it is or how to fill it. All help is appreciated, thanks.
 

Attachments

  • Geothermal.png
    Geothermal.png
    41.7 KB · Views: 282

Larroke

New Member
Jul 29, 2019
301
0
0
That I believe is the warm up or power generation amount.

Make sure the power from the geo's is going somewhere, else they won't even bother turning on.
 

NickQB7

New Member
Jul 29, 2019
9
0
0
The dot is towards the output. The cable isn't running into the output side.[DOUBLEPOST=1356995699][/DOUBLEPOST]I have 3 cables hooked up to it: A reactor, 4 geothermals, then the output- to a LV transformer then batbox. the other ones are working fine
 

netmc

New Member
Jul 29, 2019
1,512
0
0
Try breaking and replacing the cables. I've seen them bug every so often, and they "forget" to transmit any power.
 

netmc

New Member
Jul 29, 2019
1,512
0
0
Is there power going into the MFE from any of the other sources like your reactor? Are there any wiring loops?

You could try placing a machine (that won't blow up) or a forestry electric engine (since this can take any voltage) at various places along the line and see if it will power up. Wherever it stops working is where the problem is and those block/wires probably need to be broken and replaced to correct the energy net bug.
 

ShannonG

New Member
Jul 29, 2019
1
0
0
I can confirm that the geothermal generator has a glitch and sometimes it fails to push power.
I never saw this issue with Tekkit so it's something new in IC2 or something in the FTB Beta A pack.

Charging a tool in the generator will sometimes make it start working again.
 

OmegaPython

New Member
Jul 29, 2019
800
0
0
I can't get my Geothermals to output power. They are all filled with lava, but this red thing isn't filled, so I figured that was it. However, I don't know what it is or how to fill it. All help is appreciated, thanks.
Which pack are you using? Because if it IS Beta Pack A, I would recommend switching to one of the 1.4.7 packs as Beta A won't be updated anymore
 

Hydra

New Member
Jul 29, 2019
1,869
0
0
I had this exact same issue with some geothermals and an MFE I had. No idea what caused it.
 

Guswut

New Member
Jul 29, 2019
2,152
0
0
If you end up switching to the MindCraft pack, you will be able to use the "Thermal Generator" from GregTech, which gives you 30k EU per bucket. You can also use a standard Geothermal Generator and a IC2 pump to get that extra 20k EU.