Basically, I'm thinking of something that works in the reverse of a pump, that would automatically fill a large area with water, creating lakes and that. I've heard of teraformers but I do not know how customizable they are.
Any good way to fill an area with water?
- Thread starter John Freeman
- Start date
-
The FTB Forum is now read-only, and is here as an archive. To participate in our community discussions, please join our Discord! https://ftb.team/discord
if you're running 1.4.7, use the RP2 pump in conjunction with an aqueous accumulator.
RP2 pumps can do that. Place a grate at the level you want the water. Connect the pump to a tank with an infinite water source and turn it on.
cover all area with glass for the water dont flood, use a rp2 pump with 2 solars panels and 1 timer. It will slowly fill perfectly all blocks with water source blocks without deformations
In Minecraft version 1.5 you can create water source blocks on top of other water source blocks so that makes it a bit simpler. Still have to put down water sources on two sides but it's better than before. Lining the sides with ice using a Filler would be my choice. In earlier versions you have to do checkerboard patterned pillars with sources and solid blocks and remove the blocks after you have the desired height.
Yeah if you're in 1.4.7 you could fill the entire thing with ice. But I doubt it matters if you use wrathlamp or not, the light doesn't go further than normal through anything else but air. And you will have to build it in layers starting from bottom and melt it before you add the next one if you go that route.
You could potentially use a turtle to break the ice. If you do it from top down after filled fully with ice it doesn't even leave flowing water behind.
You could potentially use a turtle to break the ice. If you do it from top down after filled fully with ice it doesn't even leave flowing water behind.