FTB Monster Pack; Pulverizer question

[maskdkaosidsajod213]

I just wanted to know how to power a pulverizer. When i tried using electric engines the power wouldn't go through the pipes, but it worked on other machines like fabricator. Any solutions on how to power a pulverizer.

 

[rhn]

I just wanted to know how to power a pulverizer. When i tried using electric engines the power wouldn't go through the pipes, but it worked on other machines like fabricator. Any solutions on how to power a pulverizer.

TE3 now solely uses RF as power which and its machines can no longer be powered by MJ. You will to use either TE3's own Dynamos or any other compatible RF producing engine/reactor/etc.

RF can be converted into MJ by connecting MJ using machines with TE3 Conduits, but the opposite is not possible.

 

[Narc]

[...]RF can be converted into MJ by connecting MJ using machines with TE3 Conduits, but the opposite is not possible.

I think I had EnderIO conduits eating MJ and outputting RF at one point; regardless, there's also an Engineer's Toolbox converter block that will go both ways, as needed. There are ways to turn MJ into RF, they're just not "automatic". Easiest to just generate RF in the first place.

 

[b0bst3r]

Fueless = clockwork engine connected to EnderIO energy conduit will power a pulverizer or the extra utils solar.

Alternatively any of the extra utils generators will power any TE machine or what's already been said, use any Dynamo which are the TE's own power source.

 

[pizzawolf14]

Fueless = clockwork engine connected to EnderIO energy conduit will power a pulverizer or the extra utils solar.

Alternatively any of the extra utils generators will power any TE machine or what's already been said, use any Dynamo which are the TE's own power source.

You can use autonomous activator with this for decent power

Sent from my SM-G900V using Tapatalk

 

[namiasdf]

In between the engine and your machine, attach any TE energy conduit. TE machines now use RF, which are 0.1x the strength of MJ (though, you generate approx 10x the amount). Machines that use MJ are backwards compatible with RF via energy conduits. They convert between the two, and I suspect the type of energy output is chosen at the interface with the machine.

Thus, it is a good habit to establish a TE energy conduit network and feed any and all machines that utilize RF/MJ through this network. You will have no problems.