P
PartyRockVamp
Guest
Hello everyone, this is my first post on this forum and Merry Christmas everyone.
So I came up with this design:
So it holds the boilers at around 95-120°C and Cores never reach more than 300°C but sometimes it's there for a second. It Runs 10 Turbines at full speed and there is like 80m^3 of steam left. It's now running for half an hour and no explosion or overheat yet. And the rods are raised like that (red are raised and green are not)
Thank you for reading, you can rate the design
So I came up with this design:
R- Reflector
F- Fuel Rod
C- Control Rod
O- Central Control
S- Steam Boiler
B- Steel Block
A- Air
AARRRRRRRRRAA
AABBCBCBCBBAA
RBCBFBBBFBCBR
RBBSSSSSSSBBR
RCFSFFFFFSFCR
RBBSFCCCFSBBR
RCBSFCOCFSBCR
RBBSFCCCFSBBR
RCFSFFFFFSFCR
RBBSSSSSSSBBR
RBCBFBBBFBCBR
AABBCBCBCBBAA
AARRRRRRRRRRAA
F- Fuel Rod
C- Control Rod
O- Central Control
S- Steam Boiler
B- Steel Block
A- Air
AARRRRRRRRRAA
AABBCBCBCBBAA
RBCBFBBBFBCBR
RBBSSSSSSSBBR
RCFSFFFFFSFCR
RBBSFCCCFSBBR
RCBSFCOCFSBCR
RBBSFCCCFSBBR
RCFSFFFFFSFCR
RBBSSSSSSSBBR
RBCBFBBBFBCBR
AABBCBCBCBBAA
AARRRRRRRRRRAA
So it holds the boilers at around 95-120°C and Cores never reach more than 300°C but sometimes it's there for a second. It Runs 10 Turbines at full speed and there is like 80m^3 of steam left. It's now running for half an hour and no explosion or overheat yet. And the rods are raised like that (red are raised and green are not)
Thank you for reading, you can rate the design