After playing a while on my dw20 1.0.2 server i noticed i was drawing way more power then my machines were actually using. So i started troubleshooting everything, destroying connections machines etc yet nothing was fixing it. I even stumbled across a way to power any machine without them actually using any power. Turns out i had to disassemble all my machines, energy cells and me system and switch to different cables.
These are the bugs i came across:
Mfr energy cabling is bugged as hell when used in conjunction with energy cells from TE (havent tested any other power storage devices). They use way too much power and waste this on nothing. They will bug all machines connected to wires that are connected to these cables. I had my base being powered by conduits from enderio and had hooked up 3 cables from mfr to them to power some ic2 machines.
The other bug i came across has to do with TE energy cells. Normally i tend to put several cells on top of each other si i have a nice way of telling how much power is stored. Yet after removing or adding a few cables to the output cabling of the cells they bug out and use all power available(400 rf/t in my case) to power a redstone furnace at 20 rf/t thus wasting a #@!@load of power.
To fix this i removed all machines, cells and cabling and only placed enderio conduits and put the cells one above each other with cabling connecting each one to the next. This seems to have fixed all the problems.
I dont know what is causing this all i know i that if you want to avoid having to replace all machines just head my warning xD
Ps: i tested this on my server and singleplayer worlds even redownloaded the entire client and server yet the problem still persisted
These are the bugs i came across:
Mfr energy cabling is bugged as hell when used in conjunction with energy cells from TE (havent tested any other power storage devices). They use way too much power and waste this on nothing. They will bug all machines connected to wires that are connected to these cables. I had my base being powered by conduits from enderio and had hooked up 3 cables from mfr to them to power some ic2 machines.
The other bug i came across has to do with TE energy cells. Normally i tend to put several cells on top of each other si i have a nice way of telling how much power is stored. Yet after removing or adding a few cables to the output cabling of the cells they bug out and use all power available(400 rf/t in my case) to power a redstone furnace at 20 rf/t thus wasting a #@!@load of power.
To fix this i removed all machines, cells and cabling and only placed enderio conduits and put the cells one above each other with cabling connecting each one to the next. This seems to have fixed all the problems.
I dont know what is causing this all i know i that if you want to avoid having to replace all machines just head my warning xD
Ps: i tested this on my server and singleplayer worlds even redownloaded the entire client and server yet the problem still persisted