How to increase liquid pumped in/out?

  • Please make sure you are posting in the correct place. Server ads go here and modpack bugs go here
  • The FTB Forum is now read-only, and is here as an archive. To participate in our community discussions, please join our Discord! https://ftb.team/discord
L

Legend001523

New Member
Jul 29, 2019
5
0
0
Hi I'm currently running a railcraft tank that stores lava from one liquid tesseract from the nether, i have then got 3 valves which has liquiducts leading to 9 geo thermal generators, however, the amountof lava that is put in the tank is not as much as the lava that is being taken out. So I was wondering what i should do to increase more lava intake to the tank? Sbould i get another tesseract or more pipes that lead from that single tesseract?
 
Tesseracts can output any amount of liquid. There's no loss rate. What matters is the pipe you use. If you're using liquiducts, I believe it's 80mB/t
More liquiduct pipelines means more liquid. Just have a couple more tesseracts, I suppose or more pipelines going in/out.
 
If you're in 1.6.4, GregTech fluid pipes with pump covers can get up to 960mB/t or so. Tho with liquiducts, you're prob still in 1.5.2 or earlier.
 
I do not in any way encourage or support the drama fueling of GregTech, henceforth known as GT.
By posting the following statement or question. about GT I agree to not instigate or partake in discussion towards the berating or glorifcation of GT.
I understand that the statement or question following question does not represent my own feelings or lack thereof towards GT or anyone who uses it..
Further more by asking I agree not to insult or congratulate the recipient of the following statement or question based on their stance for or against GT.
According to the Act of Unleashed vs Unhinged 2013 I agree to not encourage the recipient of the following statement or question into the inclusion of GT or lack thereof.
All glory to the Hypnotoad.

That or he isn't using GregTech.
 
3 valves should more than supply 9 geothermals, there must be something wrong with the setup:

First, ensure the tank input tesseract is directly on the iron tank valve, don't run piping from it because pipes have limited I/O when the tesseract can move quite a bit, like a full bucket a tick.

Second, shut off the tank output for a few minutes and let it fill some, monitoring its fill rate. If its filling very slowly something is wrong with the pump apparatus. Next, turn it on and let it fill all the geothermals with some tank excess (so gather at least 100 buckets). There is a bug where sometimes tanks constantly deplete when they shouldn't if they are suffering a small milliBarrel draw.
 
You must log in or register to reply here.
Top Bottom