How can I make my wooden pipe pull from a certain slot of
- Thread starter tyler f
- Start date
-
The FTB Forum is now read-only, and is here as an archive. To participate in our community discussions, please join our Discord! https://ftb.team/discord
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
One of the gtech machines lets you do that. Advanced buffer or translocator, or something. You could also use a router ('s what I do).
One of the gtech machines lets you do that. Advanced buffer or translocator, or something. You could also use a router ('s what I do).
Ok, I did that. But I have another issue. I hooked up an emerald pipe to only pull hydrogen and air cells and the reaction creates 4 hydrogen 1 air but the emerald pipe will only pull 1 of each out each time the electrolyzer finishes it's cycle. It's ignoring the remaining 3 hydrogen even though I have it set to constantly pulse regardless of circumstances. Why would this be?
Use an Emerald Pipe.
It has a filter.
Or filter them out with Redpower machines.
Read above, the emerald pipe isn't pulling correctly.
Read above, the emerald pipe isn't pulling correctly.
Sorry, I thought you meant the original Electrolyzer.
Post a screenshot of your setup, because my wooden pipe attached to the side definitely doesn't pull the empty cells.the industrial electrolyzer? It keeps pulling out the empty cells before the electrolyzer gets a chance to use them.
And i've tried every side.
(Make sure the empty cells are in the bottom slot.)
Post a screenshot of your setup, because my wooden pipe attached to the side definitely doesn't pull the empty cells.
(Make sure the empty cells are in the bottom slot.)
The empty cells are in the designated slot for empty cells
I would really suggest using electric translocators. you have the eu there already, you just need a lv transformer for the translocator. if placed on the side of the electrolyzer, it will pull out the finished products. the same goes for any gregtech machine, I believe. the translocator just needs an inventory to dump into, like a chest or relay.
Ok, I did that. But I have another issue. I hooked up an emerald pipe to only pull hydrogen and air cells and the reaction creates 4 hydrogen 1 air but the emerald pipe will only pull 1 of each out each time the electrolyzer finishes it's cycle. It's ignoring the remaining 3 hydrogen even though I have it set to constantly pulse regardless of circumstances. Why would this be?
Emerald pipes insist on cycling through their filtered blocks until they get one of each. Once you've pulled one air cell and one hydrogen cell, it'll wait forever until it gets another air cell. You could solve this by using two separate emerald pipes with one item each...or maybe setting the first four filter slots to hydrogen and the fifth to air? Not 100% sure that would work, but it's worth a try.
Emerald pipes insist on cycling through their filtered blocks until they get one of each. Once you've pulled one air cell and one hydrogen cell, it'll wait forever until it gets another air cell. You could solve this by using two separate emerald pipes with one item each...or maybe setting the first four filter slots to hydrogen and the fifth to air? Not 100% sure that would work, but it's worth a try.
Most helpful reply here, thanks. I will try that suggestion.
EDIT: that worked. Filled it with the exact amount of cells i wanted it to pull out and it worked.