Applied Energistics ME Condenser Problem

[Molo]

Hello,

I'm trying to setup a ME Condenser to "void" my cobblestone into Singularitys but i've ran into a problem.

If i alread have some cobble in my ME System The cobble will land there, no matter what prioritys i set on the Storage Bus that leads to the Condenser or what priority i set on the ME Drive.
I want to keep the cobble I currently have in my ME System, but all new cobble i put into it, i want to be sent directly to the ME Condenser, how to?

I got help here last time so I try again with a new problem
Thanks!
/Molo

 

[Grydian2]

What I do is export the cobble into the condenser with a precision export bus. I have a level emitter set to emit a redstone signal when my cobble is below 1k. This way if it gets low it stops voiding the cobble.

 

[Molo]

What I do is export the cobble into the condenser with a precision export bus. I have a level emitter set to emit a redstone signal when my cobble is below 1k. This way if it gets low it stops voiding the cobble.

Oh, so that works?
I've been having a memory of somebody saying it MUST be a storage bus so I never tried anything else!
Well, thanks!
That was easier then expected

EDIT:
Tested it, it works!
Thanks again

 

[RadioactiveSand]

Thats one way to do it. Personally I have a storage bus on my condenser and 1k storage cells formatted for cobble and dirt. Once the cells filled to capacity all the excess goes to the condenser. If I take any cobble or dirt out of the ME system the cells will refill before sending the rest off to the condenser. The drive the cells are in is set to priority 1 and the storage bus is priority 2. With this setup you can have various other cells in the drive and it'll work so long as there isn't cobble on the other cells since ME looks at each cell as a separate inventory rather than the drive as a whole.