router question

[Bickers]

been building a bee room to mostly process the combs im getting and im useing a router with speed and bandwith upgrades im just haveing 1 problem the combs ect are getting sent over a tesseract and royal jelly and pollen are getting sorted direct to router the problem is the stuff from the combs is also getting piped to the router and sometimes the router has an item in it when the next item is trying to be input is there anyway to solve this as from testing it seems thay cant extract from and inventory and output to barrels

 

[Bickers]

someone must know if there is anyway to do this

 

[Skirty_007]

How are you sending the items to the router? Using BC pipes or RP2 tubes? I have a really simple temporary storage room with a bunch of barrels, a router and a relay with tube going to the router. I just chuck my stuff in the relay and then that sends it to the router, and if it's too fast it comes back up the tubes and cycles around until it's all gone. Tubes are great that way, no spillage.

 

[Bickers]

useing BC pipes quite messy but it works but i might try the RP route but unsure how RP tubes would cope with my setup will have to do some testing

 

[BanzaiBlitz]

You can isolate the router feed with a RP2 relay. It will automatically dump everything into a pneumatic tube line from pipes or even directly into a machine. As an added bonus, it has a 9 slot buffer if the tube system is overloaded.

 

[Bickers]

You can isolate the router feed with a RP2 relay. It will automatically dump everything into a pneumatic tube line from pipes or even directly into a machine. As an added bonus, it has a 9 slot buffer if the tube system is overloaded.

thanks so much simple solution and works perfect