Search results

Once you fill the reactor/turbines with water/steam the system should be a closed system and not need anymore/very little water input. To get water into the system have 3 ports on your reactor. Two set to input and one set to output. One of the inputs will have a Drum filled with water. The...

If you make a 7x7 you will want an X type with 5 rods for max efficiency. Here is a 7x7x7 setup. Which gets 11.7k rf/t and really only needs 8 buckets of resonant ender. Four bucket in the inner spaces touching the rods and the other four in the corners of the reactor. Cheapest, best layout...

Yes, I did a quick test and using the same control rod layout I made a reactor 7x8x6 instead of 5x6x6 and that boosted it all the way to 11.5k rf/t Here are some pics. So if you can find 1 extra block of space around the edges, you will be golden :P

I did a quick test and adding resonant ender boosted it to 7.7k Having empty space instead of reactor casing touching the rods so you can have more coolant spaces can make a huge difference. I will setup a few test scenarios and post the results.

Is it 5x6x6 interior or exterior? If it is exterior, i am assuming your layout is In case that is the layout, you will only need 6 buckets of resonant ender.

What is the layout? Does each rod have 3-4 empty spaces touching it? For best results, you want the rods close but not touching. So with 6 rods, you should have 14 empty spaces per layer. That would be 14 buckets or 56 ender pearls and if you have 1000, you have plenty. Like I said depending on...

Using a coolant port will switch your reactor from power to steam mode and will require a steam turbine to generate power which requires the waste material from a reactor that has been running a while.

Water is pretty much useless as a coolant. Barely better than nothing(air). With resonant ender and destabilized redstone, you only need source blocks on the top layer as flowing blocks cool any rods they are touching just as well as source blocks. With gelid cryotheum, you will need to fill the...

Yes, using different energy conduits can limit how much they draw. Leadstone is 80 rf/t and hardened is 400 rf/t and redstone is 10k rf/t per connection. So even though they are not as customizable as an energy cell's interface, you can for instance feed 240 rf/t into a single pre-charger by...

Each pre-charger will drain a max of 2500 rf per tick. If you want to limit this, you can place an energy cell as a buffer between your power network and the pre-charger and set the max input to a lower value to keep it from robbing the rest of your power system. It will of course run slower...

Just cheat one back in.

Make sure you are not in "Cinematic" mode. I think it is F8. If you think you have a "Stuffed" pipe problem, you can try manually adding the PGobbler mod http://minecraft.curseforge.com/mc-mods/pgobbler/ If that is your problem, then replacing TE ducts with ME wires can help a lot. Or you can...

AgrarianSkiesHQ/minecraft/config/cofh/ThermaExpansion.cfg about 3/4 the way down find the line with I:MaxItemsInStuffedDucts=20 change that to I:MaxItemsInStuffedDucts=0 if you are having issues after updating to 2.1.3

Zeit, eine nasal klingende Nerd durch nicht einverstanden mit seiner fehlerhaften Begriff der Wirklichkeit wütend machen

Grinder currently does not obtain heads from mobs. You can automate with an Auto Activator using a weapon preferably a cleaver with maxed out beheading stat. Or you can use invar spikes, they are capable of obtaining heads as drops.

Busy creating and destroying realities for the fun of it!

Extra Utilities has a Heated Redstone generator that generates 320 rf per tick when fed destabilized redstone and is pretty efficient Otherwise it will generate 160 rf using lava and redstone dust. There are generators that run on potions and food. Little know fact is that the magmatic dynamos...

Glad you figured it out. It's been a while since I have needed lava, so I could not remember exactly, but here is a picture spoiler guide for anyone that needs the simplest setup for a E-Pump. Shows the tesseract settings, layout and connections to 3 different storage tanks. Also, to make sure...

I think the lever and the directional assignment on the fluid duct is not necessary and can even cause problems. The E-Pump should automatically pump the lava into the duct when connected in a default fashion. Make sure you have the tesseract at the pump set to send fluid and the tesseract in...

Each tier has to be 1 layer lower than the previous.