Multi Farm issue

[123]

I am having an issue with the new forestry multi farms. I have the a large farm setup and running, but it is only using 3 of the 4 sides. I have the circuit board with all bronze tubes installed, so it should be using all 4 sides. The other 3 sides work just fine.

The problem
http://imgur.com/qo4bFPP

Configuration
http://imgur.com/x3B0z7o

Everything running it
http://imgur.com/NHuH8JT

Things I have tried:
1) Broke a multi-farm block and put it back to recreate the machine.
2) Took circuit card out and put it back in.
3) Took all materials out of machine and redid number 1

Any ideas on what is going on?

 

[noah_wolfe]

Any ideas on what is going on?

I had a similar problem with a recent 3x5 (carrots N/S, trees E/W) until I applied more power. I wish I had specifics, though it was around 8mj/t that it filled out. Try more juice first.

 

[Azhrael]

Everything running it
http://imgur.com/NHuH8JT

That redstone wire there is your problem. Applying redstone current to the side of the multiblock disables that side.

 

[noah_wolfe]

That redstone wire there is your problem. Applying redstone current to the side of the multiblock disables that side.

Isn't that the function of the Control Block? Those look like hatches.

 

[123]

Isn't that the function of the Control Block? Those look like hatches.

That is what I thought, I have one control block and that is in the dead center bottom. I dont believe I have any redstone around it

Also I added 4 more electric engines and I am up too 16 MJ, I let it go for the last 30 min and I still got nothing.

Ill try rigging the wire around outside to see if that helps at all

 

[b0bst3r]

Easy way to tell remove the redstone wire and any redstone signals of any sort from the farm block.

 

[Captain Neckbeard]

If that's your problem, that means I have to make a lot fewer controllers.

Edit: Yep, from the other thread it sounds like most of them are going to go unused.

 

[123]

That redstone wire there is your problem. Applying redstone current to the side of the multiblock disables that side.

Well you were right, some of my redstone went right next too the control block on the underside. Once I rewired it, it started working just fine. I even took off 4 electric engines and it is still going well.