Iron tank input question

[Jackerz101]

Hello!

I am using the Direwolf20 1.5 mod pack. My friend and I set up a 5x5 iron tank next to our quarry. We have a pump hooked up to an oil reserve, and many waterproof pipes leading out of it. The pipes lead into a valve, which is where the oil should enter the tank, correct? Oil will output out of the tank, but none will input. I have a wooden pipe on the 2nd valve (1st one is for the output), and the pipes are completely full of oil, but it will not go through the valve and into the tank. Any help? Probably a simple fix, just want some help. Thanks.

 

[Emasher]

Can you post a screenshot to clarify your setup?

 

[Malexion]

Wooden pipe or wooden waterproof pipe? Try gold water proof or conduits as well.

 

[Seraph089]

Pics would be helpful, but the way you worded it sounds like you have a wooden pipe on the tank's input? If so, that's why, wooden pipes are for output.

 

[Jackerz101]

Pics would be helpful, but the way you worded it sounds like you have a wooden pipe on the tank's input? If so, that's why, wooden pipes are for output.

Thank you sir! Wooden pipe was the conflict. Thanks again.