Bored? How about 3 fusion reactor bored?

  • Please make sure you are posting in the correct place. Server ads go here and modpack bugs go here
  • The FTB Forum is now read-only, and is here as an archive. To participate in our community discussions, please join our Discord! https://ftb.team/discord

Darknesschaos

New Member
Jul 29, 2019
100
0
0
So I decided that 1 was not enough and that I would send as many resources as possible to make these. Currently working on number 4. Also, turns out that they stack very nicely.

2013-06-24_00.28.56.png

Yes, this was put together in survival.

If you really want to see my processing area, I can show that.
 

Adonis0

New Member
Jul 29, 2019
1,800
0
0
Just something for you to note, I believe you can actually have up to four fusion reactors in one casing ring

Just rotate the set-up you have 90 degrees, and repeat that four times
 

Darknesschaos

New Member
Jul 29, 2019
100
0
0
Just something for you to note, I believe you can actually have up to four fusion reactors in one casing ring

Just rotate the set-up you have 90 degrees, and repeat that four times

I could swear that it was set that you couldn't do that.
 

Adonis0

New Member
Jul 29, 2019
1,800
0
0
I could swear that it was set that you couldn't do that.
Give it a whir in creative, see if it's possible

I'm pretty sure looking at the fusion reactor computer, it has a layout which has four fusion reactors set-up in one casing ring.

Greg-tech allows multiple machines to all use the same casing set-up, so I don't understand why he'd make the fusion reactor different
 

Ako_the_Builder

New Member
Jul 29, 2019
789
0
0
You can have a lot more injectors and stuffs™ on each set of coils to really pump the output up.

I think the bigger challenge for you would be to make enough 1. fuel to run it and 2. max overclocked gtech machines to use all the power output :D
 

Darknesschaos

New Member
Jul 29, 2019
100
0
0
Beautiful beautiful power coils. I need one of those.
Once you get one started, it does not disappoint.

You can have a lot more injectors and stuffs™ on each set of coils to really pump the output up.

I think the bigger challenge for you would be to make enough 1. fuel to run it and 2. max overclocked gtech machines to use all the power output :D


I will have to test the multi-injector/extractor thing but I did not think you needed more than 2 per ring. But currently I have about 500+ machines automated to handle production for this beast.
 

Ako_the_Builder

New Member
Jul 29, 2019
789
0
0
Once you get one started, it does not disappoint.

I will have to test the multi-injector/extractor thing but I did not think you needed more than 2 per ring. But currently I have about 500+ machines automated to handle production for this beast.


Nice that you have it all automated :) you can have the same setup as on the fusion computer side of the coils on the other 3 sides of of the 'circle' too, just without additional computers.
 

Darknesschaos

New Member
Jul 29, 2019
100
0
0
I'm pretty sure he just has a huge power room or something.

EDIT: Looking closely at the background, it's probably in a dimension where it doesn't rain or something.

Bingo[DOUBLEPOST=1372087897][/DOUBLEPOST]
Nice that you have it all automated :) you can have the same setup as on the fusion computer side of the coils on the other 3 sides of of the 'circle' too, just without additional computers.

Sorry, I don't fully understand what you are trying to say.
Edit, never mind. I think I get it. But boy, that will be cramped in there
 
  • Like
Reactions: Jess887cp

Darknesschaos

New Member
Jul 29, 2019
100
0
0
I may faint if I have multiple fusions happening in the same coil. Also, my usage is still too low. Although MFR lavafabs do a good job eating the output. My problem is getting enough plasma gens to use it all up.
 
  • Like
Reactions: Ako_the_Builder

Runo

New Member
Jul 29, 2019
370
0
0
Are you suggesting you can quadruple plasma processing time by adding more injectors and extractors? I do not believe that is the case. The reason it has space for 16 injectors is that the iridium and platinum fusion processes require 100m EU (10 injectors), and 16 adds future possibilities.

You can, however, re-use one side of the coils. You hook the rings together, so its like two zeros next to each other on an old school alarm clock making an 8. OO=8